TexasKayakFisherman.com est. 2000

Kayak fishing the Lone Star State...

User avatar
By awoodman
I have got to use up this 1 1/2 Gal. of epoxy before it gets to old.....
On with the build....
The inspiration....
pbsideR.jpg (30.03 KiB) Viewed 3791 times

pbtopR.jpg (30.92 KiB) Viewed 3791 times

Another Kayakfoundry design..

User avatar
By awoodman
After messing with the program....I came up with thes stats....with a 93 stability factor..
a new stat.GIF
a new stat.GIF (37.93 KiB) Viewed 3790 times

a speed.GIF
a speed.GIF (8.85 KiB) Viewed 3790 times

Printed out the forms and squared off the chine, then traced them onto some old forms I had from a previous strip build......they are on 16'' spacing....

User avatar
By awoodman
Then I tacked on strips to scribe the side panels...



Ok..I'm using 1/8'' 3 ply Baltic Birch for the hull...
User avatar
By awoodman
Very tight spots require a stubby....
tn_100_3222.JPG (39.61 KiB) Viewed 3790 times



The easy side panels done.. now the tricky bottom panels....
User avatar
By neon14
Looks like another really cool looking build! Man I wish we lived closer to each other. Would like to check out some of your boats.
User avatar
By awoodman
This is my first wood boat with a full deck and bulkheads..even with 1/8'' ply. this is heavier than my skin boats.... Ready for the last combing ring....


User avatar
By neon14
I like the build method. That thing looks like it will be a rocket on the water!
S.padre small window

I have at least four to five sites I check before […]

Trailering kayaks

I have seen a few guys go with a Harbor Freight t[…]

Canyon lake 4-7-20

Thanks for the report. Sounds like a good opportun[…]

Nucanoe unused items for sale

Im in north texas (McKinney). Sent from my iPho[…]