TexasKayakFisherman.com est. 2000

Kayak fishing the Lone Star State...


Please Visit our Sponsor Hook1 Kayak Fishing Gear
User avatar
By promark03
#2304906
So I was fortunate to enough to get a damaged propel drive for free. I am in the process of rebuilding it now. I have all of the parts for the rebuild except the o rings.
I know this is a long shot, but does anyone know the O’ring size that seals the bottom unit to the mid section?
They don’t list the oring size in the exploded parts diagram.

Thanks
User avatar
By Neumie
#2305021
promark03 wrote:So I was fortunate to enough to get a damaged propel drive for free. I am in the process of rebuilding it now. I have all of the parts for the rebuild except the o rings.
I know this is a long shot, but does anyone know the O’ring size that seals the bottom unit to the mid section?
They don’t list the oring size in the exploded parts diagram.

Thanks

This website seems to have good blow ups: https://thekayakfishingstore.com/catego ... dal-drive/
User avatar
By promark03
#2305286
Thanks, for the link. I had looked at those blowup pics of the parts, but it only has the part number. I ended up taking out my bad Oring and measuring it. Looks like it is 45X49X2 mm. I found them pretty cheap on Amazon.
Baitcaster gear ratios

My baitcasters are 7.5:1 (I think, 7.X:1 for sure)[…]

With the recent very high tides from TS Beta and r[…]

Sure thing!

Fishing during and around a new moon is my favorit[…]