Balsa Wood

Post Reply
User avatar
Yakety-Yak
Posts: 173
Joined: Wed Oct 07, 2015 4:13 pm

Balsa Wood

Post by Yakety-Yak »

Not sure if this is the correct board for this but admin please move this if need be.

Does anyone know where I can get balsa wood and the dimensions below or close to them, at a decent price here in the US? Thinking about building some outriggers with balsa and coating it like a surfboard so it's a lot easier to stand and fish. Thanks in advance.

L X W X H
8' X 5" X 4"


TightLines
charlief1
Posts: 13
Joined: Fri Sep 25, 2015 9:29 pm
Location: Hillsnowhere

Re: Balsa Wood

Post by charlief1 »

PM Real Big Reel. He built a yak a while ago out of balsa and it's in the builders forum if you want to take a look. He bought the biggest pieces he could, but I don't think they were that big.
User avatar
JimBeaux
Posts: 220
Joined: Sun Aug 02, 2015 7:53 pm
Location: Mid County

Re: Balsa Wood

Post by JimBeaux »

These guys have lumber from all over the world.

Acadian Hardwoods & Cypress

645 Canary St,

Vidor, TX 77662

(409) 769-8665

http://www.acadianhardwoods.net/" onclick="window.open(this.href);return false;
RealBigReel
TKF 1000 Club
TKF 1000 Club
Posts: 1867
Joined: Sat Dec 22, 2007 7:24 pm
Location: Stephenville, TX

Re: Balsa Wood

Post by RealBigReel »

This is where I got mine:
http://www.specializedbalsa.com/products/" onclick="window.open(this.href);return false;

Here is another one.
http://www.nationalbalsa.com/" onclick="window.open(this.href);return false;

There is a couple of others, Google it.
texastom
Posts: 36
Joined: Fri Jul 26, 2013 10:02 am

Re: Balsa Wood

Post by texastom »

RBR - do you have any new projects going? I enjoyed all your previous builds.
Phishtech
TKF 2000 club
TKF 2000 club
Posts: 2339
Joined: Mon Jan 30, 2006 7:47 pm
Location: DEER PARK, TEXAS

Re: Balsa Wood

Post by Phishtech »

Get you some good Luanne from Home Depot. It's basically 5mm cabinet ply. Most of the boat builders use it to build their boats, as did I. It's slightly heavier than balso but tons stronger. Plus, when you cover it with fiberglass and epoxy, it's even stronger. It should be fine for out riggers. Oh, and it's a lot cheaper than balsa.

Contact Matt over at jemwatercraft.com and for a slight fee he'll email you a set of plans to fit your spec's.
RealBigReel
TKF 1000 Club
TKF 1000 Club
Posts: 1867
Joined: Sat Dec 22, 2007 7:24 pm
Location: Stephenville, TX

Re: Balsa Wood

Post by RealBigReel »

I am currently designing a new kayak. I know pretty much what form it will have but I haven't decided on materials yet. I am trying to decide whether to go strip built, plywood or sheet styrofoam. This one will have all the best features of the previous builds. \
I am down to 2 kayaks and I will part with at least one more during the next build.
I built a kayak out of Luanne some time back. I only finished the corners with glass, but it had a thick layer of epoxy all over. It was still rather heavy and it fell apart after about 1 year of heavy use. If I were going to use plywood again I wouldn't use Luanne.
Phishtech
TKF 2000 club
TKF 2000 club
Posts: 2339
Joined: Mon Jan 30, 2006 7:47 pm
Location: DEER PARK, TEXAS

Re: Balsa Wood

Post by Phishtech »

RealBigReel wrote:I am currently designing a new kayak. I know pretty much what form it will have but I haven't decided on materials yet. I am trying to decide whether to go strip built, plywood or sheet styrofoam. This one will have all the best features of the previous builds. \
I am down to 2 kayaks and I will part with at least one more during the next build.
I built a kayak out of Luanne some time back. I only finished the corners with glass, but it had a thick layer of epoxy all over. It was still rather heavy and it fell apart after about 1 year of heavy use. If I were going to use plywood again I wouldn't use Luanne.
I've had mine for about 3 years of heavy use and it's still just as strong and waterproof as it was the day I finished her. If yours only lasted a year there was something wrong with the build. Just sayin'
User avatar
bowgarguide
TKF 5000 Club
TKF 5000 Club
Posts: 5370
Joined: Mon Jan 15, 2007 7:52 pm

Re: Balsa Wood

Post by bowgarguide »

My findings were similar to rbr , if I just taped the edges and coat the wood with resin they had a short life. If the luan was covered inside and out with cloth they held up well.
Using strips is stronger lighter and much more durable than ply.
Ron
oc1
Posts: 3
Joined: Thu Nov 12, 2015 3:13 am

Re: Balsa Wood

Post by oc1 »

Laminate the outrigger (called an ama) from high density eps foam and plywood (sort of like a surfboard). The lugs where you will attach the iako (connection poles between outrigger and boat) should be integral to the wood stringer. Then glass the whole thing. If you use epoxy resin instead of polyester resin you will not have to worry about the melting the foam. Finally, paint it with something like Interlux to protect the epoxy from UV.

3 to 4 mm thich Baltic birch plywood is really good for small boat building. You can use it for either strip plank or panels. You can even strip plank with high density foam (3 lb/cu.ft). Either way, glass the whole thing. That is where your strength comes from. Fiberglass cloth comes in a range of weights, e.g. 4 to 10 ounce per square yard. The weight of the resin should be about equal to the weight of the cloth. Several thin layers of cloth/resin is stronger than one thick layer. You can get even more strength with less weight using carbon fiber or Kevlar, but it is too expensive for most.
Post Reply