Bait caster handle side
Bait caster handle side
I am right handed and decided to purchase a couple of baitcaster reels. Which side of the baitcaster is your handle on?
- Ron Mc
- TKF 5000 Club
- Posts: 5704
- Joined: Fri Jan 20, 2006 6:12 pm
- Location: downtown Bulverde, Texas
- Contact:
Re: Bait caster handle side
I am so crazy ambidextrous, bat right handed, throw left handed, tennis left, ping-pong right - I like having tackle that works both ways. So I cast a fly rod and bait rod southpaw, wind right; and like spinning reels with LHW.
- Neumie
- Site Admin
- Posts: 4012
- Joined: Sat Nov 27, 2004 10:10 pm
- Location: SA, Hallettsville, or Rockport
Re: Bait caster handle side
I'm right handed and I cast and reel right handed.
Re: Bait caster handle side
I Typically cast bait-casting reels right handed and reel right handed. My stepson and buddy cast mostly left handed, one reels right handed, the other left side. One old fishing buddy cast right handed bait-casting reels, but like the left handed reels. I’ve right hand cast the left hand reel bait-caster, but it feels a little strange doing it that way with decades of accumulated muscle memory going the other way.
The relatively little I’ve used spinning reels has been right hand casting/ left handed retrieving.
My fly set ups, I cast both right and left handed, but leave the reel retrieval to the left side. Many of those fly reels are retrieve side reversible, but I have just stuck with leaving them all as left handed retrieve.
In a perfect world, it might be nice to pick up any set up no matter which side the reel handle is on and be comfortable and proficient casting and reeling with either hand.
The relatively little I’ve used spinning reels has been right hand casting/ left handed retrieving.
My fly set ups, I cast both right and left handed, but leave the reel retrieval to the left side. Many of those fly reels are retrieve side reversible, but I have just stuck with leaving them all as left handed retrieve.
In a perfect world, it might be nice to pick up any set up no matter which side the reel handle is on and be comfortable and proficient casting and reeling with either hand.
-
- Posts: 476
- Joined: Mon Dec 25, 2017 11:21 am
Re: Bait caster handle side
I cast right, retrieve left with baitcast/spincast and I cast right, retrieve left with spinning gear. When I started fishing with spinning reels as a youngster, the ones I had did not have reversible handles like almost all, if not all, do now, and they were all left hand retrieve, so I just got used to reeling them left handed. Now it feels strange to use them the other way. Basically, if the reel sits under the rod handle such as spinning and fly reels, I reel left handed. If it sits above the rod handle, as in baitcast/spincast reels, I reel right handed.
Re: Bait caster handle side
Lefty.
Rod stays in my strong hand, and I never have to swap hands after the cast. That's fly rods, spinning rods, casting rods and a few trolling and surf rods.
I grew up on spinning reels where that was the operating theory, and never saw a good reason to change once lefty baitcasters became readily available. My first baitcasters were Shimano Bantam BMP251 SG's from the mid '80s.
Okuma makes some nice and reasonably priced lefty trolling reels (Magda line and others) some with line counters. Penn has made lefties up to 4/0 size for many decades now. I'm told Penn turned their Long Beach factory over to making lefties one day a year back when they made stuff in the USA. Sounds like an urban legend to me, but that's back when I worked in Long Beach in the '90s.
Rod stays in my strong hand, and I never have to swap hands after the cast. That's fly rods, spinning rods, casting rods and a few trolling and surf rods.
I grew up on spinning reels where that was the operating theory, and never saw a good reason to change once lefty baitcasters became readily available. My first baitcasters were Shimano Bantam BMP251 SG's from the mid '80s.
Okuma makes some nice and reasonably priced lefty trolling reels (Magda line and others) some with line counters. Penn has made lefties up to 4/0 size for many decades now. I'm told Penn turned their Long Beach factory over to making lefties one day a year back when they made stuff in the USA. Sounds like an urban legend to me, but that's back when I worked in Long Beach in the '90s.
-
- Posts: 101
- Joined: Mon Jul 23, 2018 4:23 pm
Re: Bait caster handle side
Right handed here.
I grew up throwing spinners so I’m used to throwing, working the lure and fighting the fish with my right hand, and winding with my left. Especially since your winding hand is really just to pick up the slack... it’s not like we’re winching in big bottom fish.
But with baitcasters I like the typical right hand wind. It’s nice, especially on the kayak after paddling a couple miles and throwing the spinner a few times, it gives my right wrist a rest. I still usually cast with my right hand, but switch over and hold the rod with my left to work it.
I grew up throwing spinners so I’m used to throwing, working the lure and fighting the fish with my right hand, and winding with my left. Especially since your winding hand is really just to pick up the slack... it’s not like we’re winching in big bottom fish.
But with baitcasters I like the typical right hand wind. It’s nice, especially on the kayak after paddling a couple miles and throwing the spinner a few times, it gives my right wrist a rest. I still usually cast with my right hand, but switch over and hold the rod with my left to work it.
- Dandydon
- TKF 1000 Club
- Posts: 1547
- Joined: Thu Nov 12, 2009 6:26 pm
- Location: The Heights, on my bayou
Re: Bait caster handle side
I think it's clever how the spinning reel manufacturers invented that left OR right retrieve system achieved in seconds by inserting & screwing down your handle. You can pick your weapon.
Genius.
Sent from my SM-G973U1 using Tapatalk
Genius.
Sent from my SM-G973U1 using Tapatalk
- Ron Mc
- TKF 5000 Club
- Posts: 5704
- Joined: Fri Jan 20, 2006 6:12 pm
- Location: downtown Bulverde, Texas
- Contact:
Re: Bait caster handle side
it took awhile, though - they all began with only LHW, and just up to the 80s, most all were separate models for LH and RH wind.Dandydon wrote:I think it's clever how the spinning reel manufacturers invented that left OR right retrieve system achieved in seconds by inserting & screwing down your handle. You can pick your weapon....
Penn 716, 717 (Mitchell 300, 301, etc.) - the green Penns and the black -Z model spinfishers were 1966 to '78 before Penn offered reversible-wind spinfishers.
And of course, Penn recently re-introduced the -Z models set up just like the originals, even without skirted spools.
- Dandydon
- TKF 1000 Club
- Posts: 1547
- Joined: Thu Nov 12, 2009 6:26 pm
- Location: The Heights, on my bayou
Re: Bait caster handle side
Very cool Penn spinning reels, Ron. Funny how I started fishing with small Penn reels like that and never (horrors!) backlashing. But I did grow tired of constantly fingering my fishing line and cranking that damn bail.
As I grew up and started fishing with guides, I learned the manly advantages of level-wind baitcasters in Abu-Garcia, then Shimano, then Lews, now back to Shimano... it's enough to make your head and wallet spin.
As a mature man who casts less often (ha ha), I now carry a good baitcaster and spinning outfit. If I ever crows-nest the baitcaster, my trusty Shimano spinning reel is ready. Of course my ultimate back-up is one of Shoffer's five pre-rigged rods. Isn't modern technology the nuts?!
Sent from my SM-G973U1 using Tapatalk
As I grew up and started fishing with guides, I learned the manly advantages of level-wind baitcasters in Abu-Garcia, then Shimano, then Lews, now back to Shimano... it's enough to make your head and wallet spin.
As a mature man who casts less often (ha ha), I now carry a good baitcaster and spinning outfit. If I ever crows-nest the baitcaster, my trusty Shimano spinning reel is ready. Of course my ultimate back-up is one of Shoffer's five pre-rigged rods. Isn't modern technology the nuts?!
Sent from my SM-G973U1 using Tapatalk
- Ron Mc
- TKF 5000 Club
- Posts: 5704
- Joined: Fri Jan 20, 2006 6:12 pm
- Location: downtown Bulverde, Texas
- Contact:
Re: Bait caster handle side
I always carry a rigged baitcaster and spinning rod, spare baitcasting reel and spare spinning spool both in my lap hatch, have a 3-pc bait rod in my bow hold for backup, and usually have a 3-pc fly rod also, that I can break out for opportunity. And can add a 3rd rod holder out of the way especially for the fly rod (or spinning rod).
Re: Bait caster handle side
Same for me and it is beneficial to be able to switch hands when one gets tiredSteveRetrieve wrote:Right handed here.
I grew up throwing spinners so I’m used to throwing, working the lure and fighting the fish with my right hand, and winding with my left. Especially since your winding hand is really just to pick up the slack... it’s not like we’re winching in big bottom fish.
But with baitcasters I like the typical right hand wind. It’s nice, especially on the kayak after paddling a couple miles and throwing the spinner a few times, it gives my right wrist a rest. I still usually cast with my right hand, but switch over and hold the rod with my left to work it.
-
- Posts: 96
- Joined: Mon Nov 24, 2014 10:47 am
Re: Bait caster handle side
I’m the same way. Hard core lefty (my right hand is so uncoordinated it’s kind of sad). I cast with my left hand, hold the rod with my left hand, and reel with my right hand. I started out with a spinning reel and that’s how my dad set it up for me, so when I bought my first bait caster, I saw no reason to change.impulse wrote:Lefty.
Rod stays in my strong hand, and I never have to swap hands after the cast. That's fly rods, spinning rods, casting rods and a few trolling and surf rods.
I grew up on spinning reels where that was the operating theory, and never saw a good reason to change once lefty baitcasters became readily available. My first baitcasters were Shimano Bantam BMP251 SG's from the mid '80s.
Okuma makes some nice and reasonably priced lefty trolling reels (Magda line and others) some with line counters. Penn has made lefties up to 4/0 size for many decades now. I'm told Penn turned their Long Beach factory over to making lefties one day a year back when they made stuff in the USA. Sounds like an urban legend to me, but that's back when I worked in Long Beach in the '90s.
- Drifting Yak
- TKF 1000 Club
- Posts: 1343
- Joined: Sun Jan 11, 2015 11:02 am
- Location: Tomball
- Contact:
Re: Bait caster handle side
I am right handed so throw and retrieve bait casters with my right hand. Most Right handed people do this. And like others above, I cast spinning reels with my right hand and retrieve with my left.
Re: Bait caster handle side
I had heard the original inventor of the bait caster was a lefty, thus the RHW was actually the natural position for a lefty. It makes sense to me, why would you design a reel where you have to constantly switch hands after you cast? Seems to me that everyone has just gotten used to it and now thinks it's "correct" even though it makes no sense.
I started with the LHW bait caster because it felt more natural coming from spinning gear, where I cast with my right and wind with my left. But when I dunked 2 years ago I lost half my bait casters and got a few freebies from a friend which were RHW. So now I can say I can use either about the same.
I started with the LHW bait caster because it felt more natural coming from spinning gear, where I cast with my right and wind with my left. But when I dunked 2 years ago I lost half my bait casters and got a few freebies from a friend which were RHW. So now I can say I can use either about the same.
- OrangeQuest
- TKF 1000 Club
- Posts: 1707
- Joined: Wed Aug 18, 2010 10:39 am
- Location: West of Southwest Houston
Re: Bait caster handle side
Because I use my left hand for most everything, I cast with my left hand and reel with my right. I also hold the rod mainly in my left hand because I "feel" movement better with my left hand and have better control of the rod.
Being a lefty means I also need to buy left handed scissors, yes they make them. But they do not make cheap ones for lefties. If I ever go to a country and have to drive on the left side then shifting with my left hand and steering with my right could cause a few issues.
Oh, one more thought, Pocket knifes with clips. I have to clip the knife backwards on my left pocket then to use I have to turn it around to use it. Buck at one time made one that you could put the clip on the correct side and open and close the blade with one hand but they no long make it. I know they make knifes that you can move the clip to the other side and have a thumb post on both sides of the blade but it is not the same. It still puts the knife WRONG for a lefty to use.
Being a lefty means I also need to buy left handed scissors, yes they make them. But they do not make cheap ones for lefties. If I ever go to a country and have to drive on the left side then shifting with my left hand and steering with my right could cause a few issues.
Oh, one more thought, Pocket knifes with clips. I have to clip the knife backwards on my left pocket then to use I have to turn it around to use it. Buck at one time made one that you could put the clip on the correct side and open and close the blade with one hand but they no long make it. I know they make knifes that you can move the clip to the other side and have a thumb post on both sides of the blade but it is not the same. It still puts the knife WRONG for a lefty to use.
-
- TKF 1000 Club
- Posts: 1264
- Joined: Fri Feb 24, 2006 8:52 pm
- Location: Bayside America / TEAM COPANO
Re: Bait caster handle side
I am right handed and the handle on my bait casters are on the right side. .........cC