Post Your Boat!

User avatar
gerald
TKF 4000 Club
TKF 4000 Club
Posts: 4174
Joined: Thu Jun 12, 2003 10:48 am
Location: Gatesville, tx www.theoldmansboats.com

Post Your Boat!

Post by gerald »

I'm going to do my best to set up a few select sticky threads where we can save all the great information we are getting. Posting is relentless, which means that great threads eventually scroll down, fade away, and become lost on page 740 eleven (that's a long way back!). I don't come up with these ideas by myself. Many people are instrumental in making suggestions for improving our forum. So--with out further ado I'll open this thread for posting pictures of owner's and builder's boats. This is NOT a discussion thread. Post pictures, personal comments, and any pertinent information you think is needed so we can fully appreciate your boats. For any discussions--start a new thread. Have fun!
User avatar
DarrellS
TKF 1000 Club
TKF 1000 Club
Posts: 1637
Joined: Wed Oct 08, 2008 5:41 pm
Location: Lorena, Texas

Re: Post Your Boat!

Post by DarrellS »

My first build was an S&G Pirogue. It is 14 feet long and 23 inches wide. I have paddled lots of miles in this boat, but it always felt a little tippy.

Image

Second boat is a strip built kayak. It is 15 feet 10 inches long and is 28 inches wide. I am really enjoying this boat. It is rock solid and is going to make a great camping boat, if I ever get to go again.

Image
User avatar
gerald
TKF 4000 Club
TKF 4000 Club
Posts: 4174
Joined: Thu Jun 12, 2003 10:48 am
Location: Gatesville, tx www.theoldmansboats.com

Re: Post Your Boat!

Post by gerald »

Old Blue. One of my best fishing boats...ever. 16' X 31" (28" on the bottom, 10" sides)
Old Blue.jpg
srchr16 with Old Blue in the background.
srchr 16 by GWK.jpg
Well worn srchr16 and Old Blue is still with us.
srchr 16 after many bashes.jpg
Brazos River Fishing Boat--Conquista hull configuration.
Taking a break.jpg
The srchrE18 S&G--Stitch and Glue hybrid expedition/fishing boat.
Taking a break on Trail S.jpg


The srchrM1824P--couple of pictures of my old marathon boat.
The day after the Safari.jpg
In the water.jpg
...and that's all the boats I've kept for myself in recent years.
User avatar
bowgarguide
TKF 5000 Club
TKF 5000 Club
Posts: 5370
Joined: Mon Jan 15, 2007 7:52 pm

Re: Post Your Boat!

Post by bowgarguide »

1st boat Freedom 15 ft 28 wide built way to heavy

Image

Second boat a hot air perow,15 ft asymetrical,28 1/2 at bottom tumble homes.

Image

Third boat a decked perow for my grandaughter built a pair of these,
12 ft 26 inches wide The bumble Bee

Image

5th boat
Laker 13 ,13 ft 22 inches at bottom asymetrical

Image


My favorite all around boat the T-V

15 ft long asymetrical v bottom set up for camping with the cooler ,love this boat
24 inches at widest bottom

Image

My fastest boat 15 ft 5 inches asymetrical, 22 inches wide at widest point on bottom
v bottom decks sloped down the wind just doesnt affect this boat

Image

2 more in the garage I am working on.
Ron
User avatar
Night Wing
TKF 10,000 Club
TKF 10,000 Club
Posts: 33440
Joined: Wed Sep 24, 2003 9:30 pm
Location: Magnolia, TX

Re: Post Your Boat!

Post by Night Wing »

There are some great looking boats in this thread. :D

Nightwing's Outer Island
Night Wing posing.jpg
Finished side view.jpg
Finished rear hatch.jpg
Finished front hatch.jpg
Gerald might have posted the photos of my Outer Island from his website, but the specifications haven't been mentioned yet so here they are. My OI is 18' long, 21" wide.
User avatar
TexasZeke
Posts: 440
Joined: Thu Jan 24, 2008 7:35 pm
Location: China Spring, Texas Hand built boats

Re: Post Your Boat!

Post by TexasZeke »

Image
my first 15'3" long with a 24" bottom. While it might never be a great boat for jugs, it's turning into a pretty good boat for fishing. Danged heavy though
TexaRican
TKF 2000 club
TKF 2000 club
Posts: 2264
Joined: Tue Jul 31, 2007 9:13 am
Location: Cypress

Re: Post Your Boat!

Post by TexaRican »

My Texas Flats Canoe

Image

Image
User avatar
Night Wing
TKF 10,000 Club
TKF 10,000 Club
Posts: 33440
Joined: Wed Sep 24, 2003 9:30 pm
Location: Magnolia, TX

Re: Post Your Boat!

Post by Night Wing »

Thought I would post one more photo of my OI. This is one of my favorite photos showing how long she is. She reminds me of sleek battleship. :wink:
Attachments
Night Wing Quartering Away.jpg
Strider
TKF 5000 Club
TKF 5000 Club
Posts: 5781
Joined: Sun Jul 06, 2003 9:51 pm
Location: Bruceville-Eddy, TX

Re: Post Your Boat!

Post by Strider »

The first custom-built boat I've owned (and still my favorite paddling boat), the Brazos Boat Works Conquista

Image

The most comfortable boat I've ever paddled, the Brazos Boat Works Challenger

Image

Seashell's Brazos Boat Works River Ranger 16
(note from Gerald: This boat does have the general configuration or a River Ranger 16 except that it is much narrower. I figured with seashell's experience and natural ability that a lively little boat would fit her much better.)

Image

Kim
User avatar
Pogo
TKF 3000 Club
TKF 3000 Club
Posts: 3627
Joined: Mon Jul 28, 2003 4:49 pm
Location: League City
Contact:

Re: Post Your Boat!

Post by Pogo »

Three sea kayaks: The Outer Island in the foreground, my own design Greenland-style "cheater boat" in the middle, and the Squeedunk Cormorant 16.

Image

Below, the Northwest Canoes Merlin. This is my fishing and winter paddling boat. I don't like to get wet when it's cold.

Image

The Merlin on one of its very first outings.

Image

http://www.sawdustfactory.net" onclick="window.open(this.href);return false;
Last edited by Pogo on Wed Aug 10, 2011 8:28 pm, edited 12 times in total.
Dogpaddlin
Posts: 874
Joined: Tue Sep 18, 2007 5:34 pm
Location: Round Rock

Re: Post Your Boat!

Post by Dogpaddlin »

My first, and most certainly not my last! :D

Image

Image
Last edited by Dogpaddlin on Sun Aug 16, 2009 4:45 pm, edited 1 time in total.
User avatar
Birke
Posts: 86
Joined: Wed Mar 11, 2009 12:24 pm
Location: San Antonio

Re: Post Your Boat!

Post by Birke »

Shearwater Hybrid

Image

Outer Island

Image

Abenaki

Image
User avatar
Birke
Posts: 86
Joined: Wed Mar 11, 2009 12:24 pm
Location: San Antonio

Re: Post Your Boat!

Post by Birke »

Shearwater profile - the wife looks much better in it than me :)

Image
User avatar
Birke
Posts: 86
Joined: Wed Mar 11, 2009 12:24 pm
Location: San Antonio

Re: Post Your Boat!

Post by Birke »

Hi NW,

The specs are as follows:

Wt - 44 lbs
Beam - 22"
Length - 17'

It is called a hybrid because the hull is made from stitch and glue construction and the top is strip planked.

More info here!

http://www.clcboats.com/shop/boats/kaya ... YBRID.html
User avatar
Night Wing
TKF 10,000 Club
TKF 10,000 Club
Posts: 33440
Joined: Wed Sep 24, 2003 9:30 pm
Location: Magnolia, TX

Re: Post Your Boat!

Post by Night Wing »

Birke,

Your Shearwater looks a lot like a Spring Run. You might want to check it out. It can be built in different lengths.

http://www.redfishkayak.com/spring_run.htm" onclick="window.open(this.href);return false;

Below is a photo of her on the water.
Attachments
Spring Run #1.jpg
Spring Run #1.jpg (26.57 KiB) Viewed 63673 times
User avatar
Jerry-rigged
TKF 1000 Club
TKF 1000 Club
Posts: 1995
Joined: Thu Jun 26, 2003 5:08 pm
Location: Alvin, Tx

Re: Post Your Boat!

Post by Jerry-rigged »

Ok, Here is my canoe-

A Bateau.com Chenoa 14. Still not "done" (needs varnish and paint on the inside). 14'x35" Paddling single, the boat moves good, even with a lazy, slow stroke. The seats are not symmetrical - I moved one seat 12" toward the center - for tandem paddling, it gives the front paddler more legroom, for single paddling (or with a small passenger) it balances the boat better...

On with the pics:

Image
(the grey inside is primer, someday I will paint it tan)
Image
Image
Image
User avatar
Jerry-rigged
TKF 1000 Club
TKF 1000 Club
Posts: 1995
Joined: Thu Jun 26, 2003 5:08 pm
Location: Alvin, Tx

Re: Post Your Boat!

Post by Jerry-rigged »

Pogo-
Yup! The first two are at the abandoned boat launch canal at the end of the road, the last two are at my pier...

NW - it is heavy - I think about 65-70lbs. First boat, extra bright work with a heavy wood, etc... Built to plans, by someone that can control their epoxy usage, I think about 55lbs should be workable...
User avatar
Zen Archery
Posts: 166
Joined: Tue May 27, 2008 12:12 pm
Location: McKinney, TX.

Re: Post Your Boat!

Post by Zen Archery »

you guys are incredible!!!!
User avatar
larry long shadows
TKF 4000 Club
TKF 4000 Club
Posts: 4576
Joined: Sun Nov 25, 2007 9:59 am
Location: East Houston May the wind be to your back when you Yak

Re: Post Your Boat!

Post by larry long shadows »

Here is my first hope not my last it is a fun lil boat
Attachments
P7291354.JPG
User avatar
StuckInTheMud
Posts: 465
Joined: Thu Jan 22, 2004 12:53 pm
Location: San Antonio

Re: Post Your Boat!

Post by StuckInTheMud »

So i built my boat before this index was here, but glad to see this forum thread added in!

Sides put together here
Image

Full rub rail install. Had to bend these both at the same time together because i tried one at a time and almost had disaster. Heard a crack, stopped bending, and went to inspect. Didnt see any significant damange, so i changed tactics and bent both towards an end at once and clamped them. Then did the other end.
Image

Letting the glue dry on the bottom piece here. In hindsight, and from advice from others, ice chests with water and other such methods work well for gluing :)
Image

Routing off the bottom excess here to get a nice flush edge.
Image

The filet work here. I never could get my hands on "official" wood flour being in san diego, so i took a mix of my sanding sawdust (sanding down the rubrails made a finer dust than the rest of the stuff, so thats what i used) It still had chunks i had to pick through, and it would have been nice to have clean stuff but it was my first build and this worked just fine. I also tried another method, of using flour. Worked pretty well too. The flour filet was lighter in color and the sawdust was the darker brown, but i was painting the boat so it wasnt an issue. If you're keeping it varnish color, obviously the single color is the way to go.
Image

Putting in the wood blocks for the inside rub rail. Could have done this a little different, as far as epoxying the insides first, then putting these on while the epoxy was drying, or something to that effect. Nevertheless, it worked how i did it.
Image

Inside rub rails clamped on
Image

Glassing the inside. Lesson learned here was to go up further. I tried doing a "first coat" type approach, just getting enough on there to hold it in place. Well, i only went up as high as can be seen in the picture and once the stuff dries, the cloth is kinda stupid around the edges and you just have to cut and sand it down. If i wanted the cloth to be up higher, i should have put epoxy all over as high as i wanted it to go on the first application.
Image


Bottom glassed up, and i went a little higher up the sides in this instance. Boat was going to be painted so it didnt need to go all the way up to prevent a "line" from showing, but maybe next time.
Image

Here she is a sittin there with some coats of epoxy on her
Image
Image

And the final product.....
Image
Image
Image

Fun little boat to build and cool to have!
User avatar
larry long shadows
TKF 4000 Club
TKF 4000 Club
Posts: 4576
Joined: Sun Nov 25, 2007 9:59 am
Location: East Houston May the wind be to your back when you Yak

Re: Post Your Boat!

Post by larry long shadows »

Hey StuckinThemud to me your partly responsible for all this wooden boat post. Last year when you were makein that boat for duck hunting got every one fired up to built a boat..You got me and I bought a kit for my brother also.
Thanks
User avatar
PlasticPirogue
Posts: 121
Joined: Mon Jun 29, 2009 10:46 am
Location: Wilderness Systems Pro Staff, Shreveport, La

Re: Post Your Boat!

Post by PlasticPirogue »

Hey Stuck, nice boat. Is that an Uncle John's Kit?
User avatar
StuckInTheMud
Posts: 465
Joined: Thu Jan 22, 2004 12:53 pm
Location: San Antonio

Re: Post Your Boat!

Post by StuckInTheMud »

Yea, its an Uncle John's boat. real easy to build, because i had never built a boat before this one and got a lot of good help on general aspects of boat building from the web and various forums.
User avatar
Weasle
Posts: 46
Joined: Mon Sep 21, 2009 8:43 am
Location: McKinney, Texas

Re: Post Your Boat!

Post by Weasle »

A little unorthodox
Attachments
IMG_3284.JPG
IMG_3282.JPG
User avatar
ojdidit
Posts: 17
Joined: Fri Jun 26, 2009 9:36 am

Re: Post Your Boat!

Post by ojdidit »

Image
Image
Image
Post Reply