WRC strips

Post Reply
Bob Keyes
Posts: 17
Joined: Sat Sep 03, 2011 9:14 am

WRC strips

Post by Bob Keyes »

What is the most cost effective size board to mill into strips, Should I get a bunch of 2x4s or spend more for each and get 2x10s or 2x12s.
User avatar
bowgarguide
TKF 5000 Club
TKF 5000 Club
Posts: 5370
Joined: Mon Jan 15, 2007 7:52 pm

Re: WRC strips

Post by bowgarguide »

I buy 2+6 by 8ft at lowes
Ron
Baitman
Posts: 119
Joined: Thu Apr 28, 2011 11:01 am
Location: FarWest
Contact:

Re: WRC strips

Post by Baitman »

Spend the money and get Alaskan Yellow Cedar. Assuming you're strip planking. It bends nicely, easy to plane / sand etc. and an attractive wood after it's been finished. IMHO

Dosen't really matter what size board you start out with since you will be milling it down to size. Most people are cutting them to 3/4" wide X 3/16". Depends on your application'
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: WRC strips

Post by makenmend »

" an attractive wood after it's been finished. IMHO "

I agree but so is WRC that can be found quite inexpensively in a variety of colors to give contrast,
I will buy any size that I can that is clear (no knots), I prefer to scarf my strips but butt joints are less work ( not that much less ) and work just fine.[[URL=http://s469.photobucket.com/user/ ... .jpg[/img]/url]
Dogpaddlin
Posts: 874
Joined: Tue Sep 18, 2007 5:34 pm
Location: Round Rock

Re: WRC strips

Post by Dogpaddlin »

makenmend wrote:" an attractive wood after it's been finished. IMHO "

I agree but so is WRC that can be found quite inexpensively in a variety of colors to give contrast,
I will buy any size that I can that is clear (no knots), I prefer to scarf my strips but butt joints are less work ( not that much less ) and work just fine.[[URL=http://s469.photobucket.com/user/ ... .jpg[/img]/url]
Some of those strips look familiar... :wink:
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: WRC strips

Post by makenmend »

You would be right Sir

MM
User avatar
preacher
TKF 2000 club
TKF 2000 club
Posts: 2391
Joined: Wed Aug 15, 2007 8:56 am
Location: Winnie, Texas
Contact:

Re: WRC strips

Post by preacher »

I agree, I grab any size that is clear.
Post Reply